來源：http://www.f972.cn/ 來源：http://www.f972.cn/ 發布時間：2023-02-18
Due to the development of materials and the pursuit of architects, aluminum plate, as a new building exterior skin material, has been widely used in architecture. Because of its ability to form a semi-transparent interface between the urban street space and the interior of the building, the aluminum plate will not affect the use requirements of the interior of the building too much, and can unify the facade effect to form a complete and orderly urban interface. Next, the aluminum sheet manufacturer will talk about the application of aluminum sheet in the building skin.
1. Visual integrity
When wrapping the building facade, the aluminum panel skin can form a homogeneous facade with other materials, enrich the skin texture and layer, and adjust the indoor lighting and shading conditions. You can also design different skin effects:
(1) Homogeneous visual effect
The homogeneous visual effect is achieved by the homogeneous perforation rate of aluminum plate unit and the homogeneous skin composition of aluminum plate unit.
⑵. Heterogeneous visual effect
① The perforation rate of the unit is heterogeneous. The skin of the unit forms a homogeneous and heterogeneous perforated aluminum plate unit, which can adapt to the different functional requirements of the building interior, meet its lighting and shading requirements, and is the adaptability of its use function. ② The skin of a homogeneous cell with a homogeneous perforation rate is heterogeneous, and the gradient effect and the patterned effect can be planned separately. This should be done by designers according to local conditions.
(3) Location effect
The aluminum panel skin surrounds the building, looking from the outside to the inside, the skin is "picture" and the interior space is "bottom", and the degree of openness of the building interface can be felt with the change of light and observation angle is also different. When looking from the inside to the outside, the aluminum plate skin is "picture" and the outside is "bottom". Because the brightness of the outdoor space is higher than that of the indoor space, the human eye will unconsciously capture the space with high brightness. Through the visual scene overlay processing of the aluminum plate with high perforation rate, the outdoor scene can still be fully experienced.
2. Construction mode
(1) Outer skin body
As the main body of the external performance of the building, the overall effect of aluminum panels with different plate types and construction methods is different. As a complete and powerful image, the building stands in the natural environment. The aluminum sheet skin with rich shapes covers the facade of the building. The light entering the building becomes very soft after being filtered by the building skin, creating a very good light environment for the interior.
⑵. Elements of outer skin
The aluminum panel keel system can be juxtaposed with the aluminum panel unit to form the outer skin system. According to the size of the aluminum panel unit module, the keel system often divides the building facade with uniform grid, emphasizing the sense of facade scale.
3. Building physical environment
(1) Application of sunshade characteristics. The indoor heat of the building is mainly transferred to the inner layer through the aluminum plate hole and through the cavity. The selection of appropriate aluminum plate skin shading form and perforation rate is the key to affect its shading effect.
⑵. Application of daylighting characteristics. Daylighting and shading characteristics shall be considered. By setting the appropriate perforation rate, the same aluminum plate can not only achieve the shading effect, but also meet the indoor lighting requirements.
⑶. Application of ventilation characteristics. As a building skin, aluminum plate is often used as an open external circulation system ventilation curtain wall, which is suitable for hot summer and cold winter areas. Ventilation, energy conservation and environmental protection curtain wall can save more energy than traditional curtain wall heating.
That's all about the application of aluminum panels in building skins. If you have any doubts or needs, please come to our website http://www.f972.cn Ask!